REMOVAL - TM-3-4240-284-20-P0091

TM 3-4240-284-20&P

ITEM

LOCATION

ACTION

REMOVAL

NOTE

The unit commander or senior officer in charge of maintenance personnel assigned to remove and

dispose of the contaminated gas and particulate filters must prescribe the necessary protective clothing

(TM 10-277) to be worn during this operation. He must also prescribe the necessary safety measures to

be followed including the decontamination operation (TM 3-220) that must be performed before the new

filters are installed.

Particulate filter

M56 Gas-Particulate Filter

Set POWER switch (1) on the compartment control

Unit

module to OFF.

Loosen screw (2).

INSTALLATION

Place particulate fitter (7) in fitter housing (8), either

end first.

Grasp lnner cover by the handle andplace it in the

access cover (6).

Swing retaining bar (4) up across inner cover and

engage end of bar with catch (3).

Tlghten screw (2) until sleeve (9) is flush with top surface

(A) of retaining bar (4).

2-69