REPAIR - TM-3-4240-284-20-P0086

TM 3-4240-284-208P

2-12. PROTECTIVE ENTRANCE CONTROL MODULE - MAINTENANCE INSTRUCTIONS (CONT).

LOCATION

ITEM

ACTION

REMOVAL (CONT)

Disconnect adapter (12) on hose (13) from coupling

(14).

M10 Protective Entrance

Protective entrance con-

Remove screws (15) and washers (16).

Remove protective entrance control module (17) from

inside the protective entrance.

CAUTION

Pressure circuit may be damaged. Hold

coupling on protective entrance control

module with a wrench to prevent it from

turning.

Disconnect adapter (18) on hose (13) from adapter(19)

on protective entrance control module.

REPAIR

Fabricate replacement hose (13) (fig E-4A, app E). Cut

Hose

adapters (12 and 18) from hose and insert adapters in

new hose.

INSTALLATION

Install hose on protective entrance control module. Hold

Protective entrance con-

M10 Protective

trol module

adapter (19) with a wrench and tighten adapter (18).

Entrance

Position protective entrance control module (17) against

brackets (20) in protective entrance.

Install screws (15) through washers (16) and into brac-

kets (20). Tighten securely.

Install adapter (12) on coupling (14) and tighten.

Install electrical cable connectors J21 (9) and J20 (8)

with prefortned packings (10 and 11) in protective

entrance from the inside.

2-64