REASSEMBLY (CONT) - TM-3-4230-209-30-P0224

TM 3-4230-209-30&P

2-208

2-45. SKID ASSEMBLY (CONT).

REMARKS

LOCATION/lTEM

ACTION

Skid Assembly/

Pipe-to-tube elbow (18)

Wrap antiseizing tape around external pipe thread of pipe-to-tube

Pipe bushing (19)

elbow (18), pipe bushing (19), pipe-to-tube tee (20), and pipe bushing (21)

Pipe-to-tube tee (20)

before securing.

Pipe bushing (21)

Screw pipe-to-tube elbow (18) into pipe bushing (19) and then install into

bottom of fuel pump assembly (13). Position so open end of pipe- to-tube

elbow (18) is pointing toward the fluid vacuum filter side of skid base (2).

Flat washers (22 and 23)

Screw pipe-to-tube tee (20) and pipe bushing (21) together and install flat

washer (22) on end of pipe bushing (21). Insert end of pipe bushing (21)

Quick disconnect coupling

through hole of skid base (2) and then add flat washer (23) and quick

half (24)

disconnect coupling half (24).