REASSEMBLY (CONT) - TM-3-4230-209-30-P0221

Pipe-to-tube elbow (5)

Wrap antiseizing tape around external pipe threads on pipe-to-tube

Pipe bushing (6)

elbow (5), pipe bushing (6), and pipe nipple (8). Screw pipe-to-tube

Fluid vacuum filter (7)

elbow (5) into pipe bushing (6). Install as a unit into fluid vacuum filter (7),

Pipe nippIe (8)

Screw pipe nipple (8) into fluid vacuum filter (7).

Flat washers (9 and 10)

Slide one flat washer (9) onto end of pipe nipple (8), and slide end of pipe

Quick disconnect coupling

nipple (8) through hole in skid base (2). Add flat washer (10) and quick

half (11)

disconnect coupling half (11) and secure.

2-205

TM 3-4230-209-30&P