DISASSEMBLY - TM-3-4230-209-30-P0208

2-192

TM 3-4230-209-30&P

2-44. FUEL HOSE ASSEMBLY AND FILLER OPENING CAP ASSEMBLY (CONT).

LOCATION/lTEM

ACTION

REMARKS

Fuel Hose Assembly/

Hose clamps (1)

Remove two hose clamps (1) by driving a flat bladed tool between the

The old style fuel hose assembly with an external solid

Nonmetallic hose (2)

buckle and the band, or by cutting off nonmetallic hose assembly (2)

wire may be used until the external solid wire breaks.

Rubber hose (3)

directly behind hose clamp (1).

At that time, the old pipe to hose straight adapter (8)

Quick disconnect

and rubber hose (3) will be discarded and replaced

coupling half (4)

Cut and remove the electrical tape holding nonmetallic hose (2) and rub-

with a wire reinforced hose eliminating the need for a

Pipe to hose straight

ber hose (3) together.

separate ground wire.

adapter (5)

Pipe to hose straight

Unscrew and remove quick disconnect coupling half (4). Pull pipe to hose

adapter (6)

straight adapter (5) out of nonmetallic hose (2), then pull nonmetallic

Plug assembly (7)

hose (2) off pipe to hose straight adapter (6). Unscrew and remove pipe to

Pipe to hose straight

hose straight adapter (6) from plug assembly (7).

adapter (8)

Quick disconnect

Unscrew and remove pipe to hose straight adapter (8) from plug assem-

coupling half (9)

bly (7) and remove with rubber hose (3) as an assembly. Unscrew and

remove quick disconnect coupling half (9) from pipe to hose straight

adapter (8).