REASSEMBLY (CONT) - TM-3-4230-209-30-P0184

TM 3-4230-209-30&P

2-168

2-33. LIQUID FUEL WATER HEATER AND CABINET TOP COVER (CONT).

REMARKS

ACTION

LOCATION/lTEM

REASSEMBLY (CONT)

Liquid Fuel Water Heater and

Cabinet Top Cover/

Slide shackle (55) into place and aline holes. Install bolt (56) and nut (57).

Shackle (55)

Tack weld nut (57) and bolt (56).

Bolt (56)

Nut (57)

Screws (59), washers (60), and nuts (61 ) may already

Position plate (58) onto cabinet frame (5) and aline holes. Install three

Plate (58)

be installed when control box was installed. If so, they

machine screws (59) through plate (58), cabinet frame (5), and top edge

Machine screws (59)

will be removed and reinstalled correctly.

of control box (9). Secure with three internal tooth lock washers (60) and

Internal tooth lock

hexagon plain nuts (61).

washers (60)

Hexagon plain nuts (61)

If new cabinet top cover is used, lineup upper and

Install five machine screws (62) across top and sides of plate (58). Secure

Machine screws (62)

lower clamping catches to drill holes.

with five internal tooth lock washers (63) and hexagon plain nuts (64).

internal tooth lock

washers (63)

Hexagon plain nuts (64)

Apply new decal (65) to inside surface of cabinet top cover (66).

Decal (65)

Cabinet top cover (66)

Position new clamping catches (67) over edge of cabinet top cover (66).

Clamping catches (67)

Install two solid rivets (68) through clamping catch and cabinet top cover

Solid rivets (68)

and secure.

Close cabinet top cover (66) and latch both clamping catches (67) to

make sure they match.