REASSEMBLY (CONT) - TM-3-4230-209-30-P0182

2-166

TM 3-4230-209-30&P

2-33. LIQUID FUEL WATER HEATER AND CABINET TOP COVER (CONT).

LOCATION/lTEM

ACTION

REMARKS

REASSEMBLY (CONT)

Liquid Fuel Water Heater and

Cabinet Top Cover/

Rear access cover (34)

Insert rear access cover (34) into cabinet frame (5). Position rear access

Machine screws (35)

cover (34) to aline the eight end holes. Install eight machine screws (35)

Internal tooth lock

and secure with eight internal tooth lock washers (36) and hexagon plain

washers (36)

nuts (37).

Hexagon plain nuts (37)

Loop clamp (38)

Coil excess length of capillary tube into a coil no less than six inches in

Machine screw (39)

diameter. Slide loop clamp (38) around the coiled capillary tube and make

sure capillary will not be pinched in the loop clamp (38). Secure with

Internal tooth lock

washer (40)

machine screw (39), internal tooth lock washer (40), and hexagon plain

Hexagon plain nut (41)

nut (41).

Quick disconnect

Wrap the male threads on the pipe coming from the boiler assembly (1)

coupling (42)

and quick disconnect coupling (42) with antiseizing tape.

Pipe elbow (43)

Screw quick disconnect coupling (42) into pipe elbow (43). Screw onto

pipe of boiler assembly (1) as a unit.