DISASSEMBLY/REPAIR/REASSEMBLY

2-136

TM 3-4230-209-30&P

2-28. CONTROL PANEL ASSEMBLY (CONT).

LOCATION/lTEM

ACTION

REMARKS

DISASSEMBLY/REPAIR/REASSEMBLY

Alternator Junction Box/

Machine screws (1)

Remove six machine screws (1), lock washers (2), nuts (3), and cover (4).

All of the following listed items are supplied as part of

Lock washers (2)

the alternator junction box.

Nuts (3)

Cover (4)

Tag wires (5) to identify for installation on new switch. Unscrew and

Wires (5)

Screws (6)

remove two screws (6) securing wires (5) to toggle switch (7). Holding

Toggle switch (7)

toggle switch (7), unscrew and remove nut (8). Remove toggle switch (7).

Nut (8)

Tag and unsolder leads to electrical connector (9). Remove four machine

Electrical connector (9)

screws (10) and electrical connector (9).

Machine screws (10)

Replace ail unserviceable authorized parts.

Install electrical connector (9) and fasten with four machine screws (10).

Connect electrical leads.

Insert toggle switch (7) through switch hole in the case, screw nut (8) onto

toggle switch (7) threaded stem, and tighten.

Determine identification of wires from the tags applied earlier. Reconnect

wires (5) to correct toggle switch terminals with screws (6) and tighten.

Install cover (4), and secure with six lock washers (2), machine screws (1),

and nuts (3). Tighten.