REPAIR - TM-3-4230-209-30-P0147

Wipe all switches and gages with a cloth to remove accumulated dirt.

Control Panel Assembly/

Wipe the control panel surface with a cloth soaked in water or dry clean-

ing solvent. Dry thoroughly.

Inspect switches and gages for loose parts or damaged leads.

Inspect gages for cracked glasses.

Inspect identification plates and starting procedure instruction

identification plate for legibility.

Inspect the control panel for dents, and for signs of rust, chipped paint, or

other damage.

Control Panel Assembly/

Power Cable Assembly/

Replace authorized unserviceable parts. Repair by replacing crimp type

Crimp type terminal lug (1)

terminal lugs (1).

Remove approximately 3/8 inch of insulation from wire end, insert wire

through terminal lug barrel, and crimp terminal to wire end.

TM 3-4230-209-30&P

2-131