REASSEMBLY - TM-3-4230-209-30-P0138

2-122

TM 3-4230-209-30&P

2-26. PUMP BASE SKID, ENGINE MOUNT 1, ENGINE MOUNT 2 (CONT).

LOCATION/lTEM

REMARKS

ACTION

Pump Base Skid, Engine

Mount 1, Engine Mount 2/

Nut (1)

If nuts (1) have been moved or replaced, install nuts (1) into the stationary

Channel assembly (2)

part of channel assembly (2) and lay the moveable part of channel assem-

bly (2) alongside. Adjust nuts so they will aline with the drilled holes.

Hexagon head cap

Position moveable part of channel assembly (2) onto stationary part of

screw (3)

channel assembly (2) and aline holes to nuts (1). Install two hexagon head

Flat washer (4)

cap screws (3) through fiat washers (4), shock mount pads (5), moveable

Shock mount pad (5)

part of channel assembly (2) and into nuts (1).

Machine bolt (6)

Install machine bolt (6) through end of stationary part of channel

assembly (2) and into the end of the moveable part of channel

assembly (2).

Nut (7)

If nuts (7) have been moved or replaced, install nuts (7) into stationary

Channel assembly (8)

part of channel assembly (8) and lay the moveable part of channel assem-

bly (8) alongside. Adjust nuts so they will aline with the drilled holes.

Hexagon head cap

Position moveable part of channel assembly (8) onto stationary part of

screws (9)

channel assembly (8) and aline holes to nuts (7). Install two hexagon head

Lock washers (10)

cap screws (9) through lock washers (10), moveable part of channel

assembly (8), and into nuts (7).

Install machine bolt (11 ) through stationary part of channel assembly (8)

Machine bolt (11)

and into end of the moveable part of channel assembly (8).

Hexagon head cap

Insert one hexagon head cap screw (12) up from the bottom through

screw (12)

channel assembly (8), shock mount pad (13), flat washer (14), and

hexagon self-locking nuts (15).

Shock mount pad (13)

Flat washer (14)

Hexagon self-locking

nut (15)