REASSEMBLY - TM-3-4230-209-30-P0096

2-80

TM 3-4230-209-30&P

2-20. SKID BASE SUBASSEMBLY (CONT).

LOCATION/lTEM

REMARKS

ACTION

REASSEMBLY

Skid Base Subassembly/

Remove two machine bolts (1) and lock washers (2) from rear engine

Machine bolt (1)

mount (3). Position two shock mount pads (4) onto rear engine mount

Lock washer (2)

over the holes.

Rear engine mount (3)

Shock mount pad (4)

Remove hexagon plain nut (5), lock washer (6), and machine bolt (7) from

Hexagon plain nut (5)

front engine mount (8). Position shock mount pad (9) to aline with hole.

Lock washer (6)

Machine bolt (7)

Front engine mount (8)

Position engine (10) to rest on shock mount pads (4 and 9) and aline the

three sets of holes. Reinstall the two machine bolts (1) and lock

Shock mount pad (9)

washers (2) through the engine (10) shock mount pads (4) and into rear

Engine (10)

engine mount (3). Reinstall machine bolt (7), lock washer (6), and hexagon

plain nut (5) in front engine mount area.

Install throttle clip (11) if engine (10) has a carburetor built by Bendix

Throttle clip (11)

Corporation and secure with screw (12) supplied with the engine (10).

Screw (12)