DISASSEMBLY (CONT) - TM-3-4230-209-30-P0089

Screw (48)

Unscrew and remove three screws (48) and

Lock washer (49)

three lock washers (49) from driver

Driver pulley (50)

pulley (50). Separate lock washers (49) from

screws (48).

Setscrew (51)

Hub (52)

Screw three screws (48) into the alternate

threaded holes of driver pulley (50) and

tighten equally. This drives driver pulley (50)

away from the engine and exposes the

setscrew (51) in hub (52). Remove driver pul-

ley (50).

Power-take-off adapter (53)

Loosen the setscrew (51) in hub (52) and pull hub (52) off of power-take-

Machine key (54)

off adapter (53).

Lift machine key (54) out of the slot in power-take-off adapter (53).

2-73

TM 3-4230-209-30&P