REASSEMBLY - TM-3-4230-209-30-P0059

Engine Fuel Tank/

Wrap male threads of pipe reducer (1) with antiseizing tape before

Pipe reducer (1)

installing it in boss (2). Install pipe reducer (1) into the boss (2) located on

Boss (2)

the bottom of the fuel tank (3).

Fuel tank (3)

Slide gasket (4) onto fuel quantity transmitter (5) underside, position

Gasket (4)

against the flange, and aline the mounting holes. Position fuel quantity

Fuel quantity transmitter (5)

transmitter (5) so movable arm will be approximately at a 45 degree angle

inside the tank when secured.

Carefully guide the movable arm through the hole and aline the mounting

Internal tooth lock

holes. Install the five internal tooth lock washers (6) and machine

washer (6)

screws (7). Tighten machine screws evenly against fuel quantity transmit-

Machine screws (7)

ter (5) flange.

TM 3-4230-209-30&P

2-43