ENGINE FUEL TANK.

Pump Unit Assembly/

Insert shell (37) into position and adjust so edge is recessed about 1/4

Shell (37)

inch inside the frame. Install 14 thread tapping screws (38) and tighten.

Thread tapping screws (38)

Position gun bracket (39) onto shell (37) and aline holes. Install two

Gun bracket (39)

machine screws (40) and flat washers (41) through gun bracket (39) and

Machine screws (40)

shell. Secure with hexagon head self-locking nuts (42). Repeat proce-

Flat washers (41)

dures for mounting other gun bracket.

Hexagon head self-locking

nuts (42)

2-15. ENGINE FUEL TANK.

This task covers:

c. Reassembly

a. Disassembly

b. Repair

INITIAL SETUP

Equipment Condition

Tools and Special Tools

Unit maintenance authorized components are removed in

Automotive Maintenance and Repair Field Maintenance

TM 3-4230-209-20&P and are not covered in this manual.

Shop Equipment, Basic, Less Power (SC 4910-95-CL-A31)

Special Safety Instructions

Materials/Parts

Antiseizing tape (item 38, app C)

General purpose lubricating oil (item 24, app C)

WARNING

Polyurethane coating (green) (item 29, app C)

Gasoline vapor in the fuel tank is hazardous. Purge the fuel tank before

Wire brush (item 7, app C)

performing maintenance. Smoking or open flame around the fuel tank is

prohibited.

References

TM 38-230-1

TM 43-0139

TM 3-4230-209-30&P

2-41