REASSEMBLY (CONT) - TM-3-4230-209-30-P0054

TM 3-4230-209-30&P

2-38

2-14. PUMP UNIT ASSEMBLY (CONT).

REMARKS

ACTION

LOCATION/lTEM

REASSEMBLY (CONT)

Slide throttle cable (5) into throttle clamp (6). Guide end of throttle into the

Throttle cable (5)

throttle adapter (7) and tighten setscrew (8). Tighten bolt (9) to tighten

Throttle clamp (6)

throttle clamp (6).

Throttle adapter (7)

Setscrew (8)

Bolt (9)

Route choke cable (10) underneath the frame of the pump unit sub-

Choke cable (10)

assembly and over to the carburetor as shown. Guide the preformed end

Choke lever (11 )

of the choke cable (10) through hole in choke lever (11). Position large

Clamp (12)

section of choke cable (10) into clamp (12) and tighten setscrew (13) to

Setscrew (13)

secure choke cable (10) in clamp. Attach spring (14) to choke lever (11).

Spring (14)

Use new tiedown straps (15) to secure choke cable (10) to the frame to

Tiedown straps (15)

keep it from flopping.