DISASSEMBLY (CONT) - TM-3-4230-209-30-P0051

Pump Unit Assembly/

To remove control paneI assembly, electrical wires

Unscrew engine disconnect cable (24) from rear of engine. Also discon-

Engine disconnect

and control cables must be disconnected from the

nect wire (25) connected between STOP-RUN-START SWITCH and the

cable (24)

engine. These wires and cables are subcomponents

oil pressure switch.

Wire (25)

of the control panel assembly.

Oil pressure switches on engines manufactured

before January 1969 are at the front end of the

engine.

Oil pressure switches on engines manufactured after

January 1969 are mounted at the rear of the engine.

Tiedown straps (26)

Cut and discard electrical tiedown straps (26) securing the choke cable to

Setscrew (27)

the frame. Loosen but don't remove setscrew (27), until clamp (28) is

Clamp (28)

Spring (29)

Choke lever (30)

Choke rod (31)

Choke cable (32)

TM 3-4230-209-30&P

2-35