REASSEMBLY - TM-3-4230-209-30-P0046

2-30

TM 3-4230-209-30&P

2-12. ACCESS COVER (CONT).

LOCATION/lTEM

ACTION

REMARKS

Access Cover/

Replace authorized unserviceable parts.

Gaskets

When gaskets are loose but not brittle or damaged, rebond to cover panel

with adhesive. Fabricate gaskets (fig D-11) as required. Fabricate gaskets

(fig D-10) as required.

Cover panel

Repair cover panel by straightening dents, removing rust, and repainting

lettering with black polyurethane coating and small paint brush. Use

green polyurethane coating to paint the panel. Refer to TM 43-0139.

Repaint REMOVE BEFORE OPERATING in 1 1/2 inch high letters with

black polyurethane coating.

Access Cover/

Gaskets (1)

Bond gaskets (1) to back side of cover panel (2) with adhesive. Cut holes

Cover panel (2)

in gaskets (1) at assembly to fit.

Gaskets (3)

Bond gaskets (3) to back side of cover panel (2) with adhesive. Cut holes

in gaskets (3) at assembly to fit.

Turnlock stud

Use camloc fastener tool and camloc fastener pliers to replace turnlock

assemblies (4)

stud assemblies (4), turnlock fastener eyelets (5), and retaining rings (6).

Turnlock fastener

eyelets (5)

Retaining rings (6)