REASSEMBLY - TM-3-4230-209-30-P0040

TM 3-4230-209-30&P

2-24

2-9. COVER PANEL ASSEMBLY (CONT).

REMARKS

ACTION

LOCATION/lTEM

Cover Panel Assembly/

Replace authorized unserviceable parts.

When gaskets are loose but not brittle or damaged, rebond to access

Gaskets

cover with adhesive. Fabricate gaskets (fig D-8) as required. Fabricate

gaskets (fig D-7) as required.

Repair access cover by straightening dents, removing rust, and repainting

Access

cover

lettering with black polyurethane coating and small paint brush. Use

green polyurethane coating to paint the access cover. Refer to

TM 43-0139.

Repaint REMOVE BEFORE OPERATING using 1-1/2 inch high lettering.

Cover Panel Assembly/

Bond gaskets (1) to back side of access cover (2) with adhesive.

Gaskets (1)

Access cover (2)

Bond gaskets (3) to back side of access cover (2) with

G a s k e t s (3)

adhesive.

Turnlock stud

Use camloc fastener tool and camloc fastener pliers to

replace turnlock stud assemblies (4), turnlock fastener

assemblies (4)

eyelets (5), and retaining rings (6).

Turnlock fastener

eyelets (5)

Retaining rings (6)