REASSEMBLY - TM-3-4230-209-20-P0229

Skid Base Assembly/

Repair by replacing authorized items.

Authorized items

Skid Base Assembly/

Direct current motor (1)

Position direct current motor (1) into skid base (2), and secure with four

internal tooth lock washers (3) and hexagon head cap screws (4). Re-

Skid base (2)

attach electrical lead (5).

Internal tooth lock

washers (3)

Hexagon head cap

screws (4)

Electrical lead (5)

Install the two drive arms (6) and aline hole. Secure with the spring

Drive arms (6)

pins (7).

Spring pins (7)

Install magneto assembly (8) onto end of direct current motor (1) and aline

Magneto assembly (8)

mounting holes. Secure with four internal tooth lock washers (9) and

Internal tooth lock

hexagon head cap screws (10). Attach igniter cable assembly (11 ).

washers (9)

Hexagon head cap

screws (10)

Igniter cable assembly (11 )

TM 3-4230-209-20&P

2-197