REASSEMBLY (CONT) - TM-3-4230-209-20-P0199

Electrical tiedown

Starting at the control box end of the wire bundle, install electrical tiedown

straps (39)

straps (39) along entire length of electrical wires and capillary tube four

inches apart. Do not pull the electrical tiedown straps so tight that they

smash the capillary tubes.

Access cover (40)

Position access cover (40) onto front of the boiler unit (29) and secure

Internal tooth lock

with three internal tooth lock washers (41) and hexagon plain nuts (42).

washers (41)

Hexagon plain nuts (42)

Nonmetallic grommet (43)

Slide nonmetallic grommet (43) around electrical wires and capillary tubes

and slide nonmetallic grommet into the notched area of access cover (40).

Access cover (44)

Insert access cover (44) into the cabinet frame (45) and line up the four

Cabinet frame (45)

holes in each end with those holes in the cabinet frame (45). Install four

Machine screws (46)

machine screws (46), internal tooth lock washers (47), and hexagon plain

Internal tooth lock

nuts (48).

washers (47)

Hexagon plain nuts (48)

Position access cover (40) to

internal tooth lock

cover (44). Secure with three

washers (49)

machine screws (50).

Machine screws (50)

2-167

TM 3-4230-209-20&P