DISASSEMBLY (CONT) - TM-3-4230-209-20-P0180

TM 3-4230-209-20&P

2-148

2-32. LIQUID FUEL WATER HEATER (CONT).

REMARKS

LOCATION/lTEM

ACTION

DISASSEMBLY (CONT)

Liquid Fuel Water Heater/

Remove three machine screws (71 ), internal tooth lock washers (72),

Machine screws (71)

three hexagon plain nuts (73) and internal tooth lock washers (74) from

Internal tooth lock

washers (72)

studs located on boiler unit (59).

Hexagon plain nuts (73)

internal tooth lock

washers (74)

Access cover (75)

Lift the wire bundle up away from access cover (75) and make sure

nonmetallic grommet (76) comes out of the U-slot of access cover. Care-

Nonmetallic grommet (76)

fully guide access cover (75) out from front of the boiler unit (59).

Slip nonmetallic grommet (76) off of wire bundle and capillary tube

carefully.

Remove four hexagon plain nuts (77), internal tooth lock washers (78)

Hexagon plain nuts (77)

internal tooth lock

and machine screws (79).

washers (78)

Machine screws (79)

Access cover (80)

Lift access cover (80) out of the cabinet frame (70). Cut and discard all

Electrical tiedown

electrical tiedown straps (81) on wire bundle over boiler unit (59).

straps (81)