REASSEMBLY - TM-3-4230-209-20-P0136

2-104

TM 3-4230-209-20&P

2-25. THROTTLE LINKAGE ASSEMBLY (CONT).

ACTION

REMARKS

LOCATION/lTEM

Throttle Linkage Assembly/

Insert the end of throttle rod (1) with the fewest threads into loop

Throttle rod (1)

Loop clamp (2)

clamp (2). Screw hexagon plain nut (3) on throttle rod (1) up to the end of

the threads. Screw throttle adapter (4) on throttle rod (1) until it bottoms.

Hexagon plain nut (3)

Screw hexagon plain nut (3) against throttle adapter (4) and tighten. Install

Throttle adapter (4)

setscrew (5) loosely.

Setscrew (5)

Swivel (6)

Slide swivel (6) over throttle rod (1) and screw on hexagon plain nuts (7

and 8). Tighten hexagon plain nuts (7 and 8) against each other at outer

Hexagon plain nuts (7

end of throttle rod (1). Place flat washer (9), remote control lever (10), and

and 8)

flat washer (11) on stud of swivel (6). Secure with cotter pin (12).

Flat washer (9)

Remote control lever (10)

Flat washer (11)

Cotter pin (12)

Retaining strap (13), hexagon head cap screw (14), and internal tooth lock

Retaining strap (13)

Hexagon head cap

washer (15) must be attached, shipped, and taped to the throttle linkage

screw (14)

assembly. A hexagon nut can be used to secure items (13, 14, and 15) for

Internal tooth lock

shipment.

washer (15)