DISASSEMBLY - TM-3-4230-209-20-P0125

Remove hexagon head cap screw (7) and terminal of cable (8) from

Hexagon head

alternator (2). Remove nut (9) and flat washers (10) to loosen ground

cap screw (7)

cable (11) from alternator (2).

Cable (8)

Nut (9)

Flat washers (10)

Ground cable (11)

Unscrew and remove two hexagon plain nuts (1), two internal tooth lock

Internal tooth lock

washers (12), two hexagon head cap screws (13), and two internal tooth

washers (12)

lock washers (14).

Hexagon head cap

screws (13)

Lift alternator (2) (intact) off the skid base subassembly.

Internal tooth

lock washers (14)

Make sure woodruff key is attached to alternator

Unscrew and remove hexagon head cap screw (15), internal tooth lock

Hexagon head cap

shaft.

washer (16), alternator bracket (17), self-locking nut (18), flat washer (19),

screw (15)

and groove pulley assembly (20).

Internal tooth

lock washer (16)

If the alternator is to be replaced, disassemble and keep hexagon head

Alternator bracket (17)

cap screw (15), internal tooth lock washer (16), alternator bracket (17),

Self-locking nut (18)

and groove pulley (20) to use on the new alternator.

Flat washer (19)

Groove pulley

assembly (20)

TM 3-4230-209-20&P

2-93