REASSEMBLY (CONT) - TM-3-4230-209-20-P0123

Pump Unit Subassembly/

Wrap the external threads of the suction pipe and the

Orient the 90 pipe elbow (10) so that when tightened the open end is at

Pipe elbow (10)

two discharge pipes projecting through the connector

the 4 o'clock position.

Quick disconnect coupling

panel with antiseizing tape.

half (11)

Screw pipe elbow (10) onto the suction line and tighten. Screw quick

disconnect coupling half (11) into pipe elbow (10) and tighten

Reconnect chain (12) and S chain

Chain (12)

hook (13) to dust and moisture

S chain hook (13)

Dust and moisture seal

seal protective cap (14) with

gasket (15), and recap.

protective cap (14)

Gasket (15)

Screw quick disconnect coupling

Quick disconnect coupling

halves (16 and 17) onto the two

half (16)

discharge lines and tighten with

Quick disconnect coupling

the proper tools. Reconnect

half (17)

chain (18) and S chain hook (19)

Chain (18)

to dust and moisture seal protec-

S chain hook (19)

Dust and moisture seal

tive cap (20) with gasket (21).

Recap discharge line.

protective cap (20)

Gasket (21)

Chain (22)

Reconnect chain (22) and S chain

hook (23) to dust and moisture seal

S chain hook (23)

Dust and moisture seal

protective cap (24) with gasket (25).

Recap discharge line.

protective cap (24)

Gasket (25)

TM 3-4230-209-20&P

2-91