EDUCATOR HOSE ASSEMBLY.

2-16. EDUCTOR HOSE ASSEMBLY.

This task covers:

c. Reassembly

a. Disassembly

b. Repair

INITIAL SETUP

Equipment Condition

Tools and Special Tools

Eductor hose assembly is removed from pump unit (see page 2-47).

Automotive Maintenance and Repair Shop Equipment, Less Power

See para 2-12 for disassembly/reassembly procedures.

(SC 4910-95-CL-A72 and SC 4910-95-CL-A74)

Strap band clamping tools P38.

Materials/Parts

Rubber hose (fig E-3)

REMARKS

ACTION

LOCATION/lTEM

Eductor Hose Assembly/

Only one end of the eductor hose assembly is shown

Remove hose clamp (1) by driving a flat bladed tool into buckle to free the

Hose clamps (1)

because both ends are the same.

band or by cutting hose (2) off behind the end of hose clamp (1). Keep

Hose (2)

serviceable parts.

Gasket (3)

Nut (4)

Remove gasket (3). Grasp hose (2) and pull out nut (4). Separate stem (5)

Stem (5)

from nut (4). Keep serviceable parts.

Replace authorized serviceable parts.

Eductor Hose Assembly/

Replace the hose (2) if it is less than 8 inches 0.250 inch in length.

Replace the hose clamp (1) if it is loose or damaged.

Replace the nut (4) it it is out-of-round, cracked, or has damaged threads.

Replace the stem (5) if it is cracked or broken, and replace the gasket (3) if

it is damaged.

TM 3-4230-209-20&P

2-81