REASSEMBLY - TM-3-4230-209-20-P0106

TM 3-4230-209-20&P

2-74

2-13. GUN AND SLURRY NOZZLE ASSEMBLIES (CONT).

REMARKS

ACTION

LOCATION/lTEM

Rockwood and All-Bann

Slurry Nozzle Assembly/

Screw orifice and deflector set (1) into nozzle (2). Hold rear of nozzle (2)

Orifice and deflector set (1)

with a wrench and tighten orifice and deflector set (1).

Nozzle (2)

Rotate knurled area of nozzle (2) until orifice and deflector set (1) closes.

NOTE

If you have an AII-Bann slurry nozzle assembly, go straight

to the gun assembly and begin with ball valve.

Rockwood Slurry Nozzle

Assembly/

The spacer ring and retaining ring are only used on

Insert spacer ring (3) and snap retaining ring (4) into front of nozzle (2).

spacer ring (3)

slurry nozzles manufactured by the Rockwood

Retaining ring (4)

Company.

Gun Assembly/

Ball valve (5)

Screw ball valve (5) and straight adapter (6) together and tighten.

Straight adapter (6)

Insert gasket (7) into slurry nozzle assembly (8) and screw them onto

Gasket (7)

Slurry nozzle assembly (8)

straight adapter (6) and tighten.