REASSEMBLY - TM-3-4230-209-20-P0094

TM 3-4230-209-20&P

2-62

2-12. PUMP UNIT (CONT).

REMARKS

ACTION

LOCATION/lTEM

Pump Unit/Control Panel

Make sure valve (3) is in open position when handle is

Insert locking sleeve (1) and sleeve extension (2) over the stem of ball

Locking sleeve (1)

installed in the center position. Valve will close when

valve (3) and secure with nut (4).

Sleeve extension (2)

handle (7) is moved to CLOSE.

Ball valve (3)

Nut (4)

Insert extension rod (5), aline its holes with holes in sleeve extension (2),

Extension rod (5)

and insert spring pin (6).

Spring pin (6)

Put handle (7), fiat washer (8), and hexagon self-locking nut (9) on the

Handle (7)

other end of extension rod (5). Tighten nut (9).

Flat washer (8)

Hexagon self-locking nut (9)