CHAPTER 2 MAINTENANCE INSTRUCTIONS - TM-3-4230-209-20-P0032

TM 3-4230-209-20&P

2-0

CHAPTER 2

M A I N T E N A N C E INSTRUCTIONS

Section I. REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT

2-3. REPAIR PARTS. Repair parts are listed and illustrated in appendix C of

2-1. COMMON TOOLS AND EQUIPMENT. For authorized common tools and

this manual.

equipment refer to the Modified Tables of Organization and Equipment (MTOE)

applicable to your unit.

2-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT. There are no

special tools required for unit maintenance. Tools and test equipment are listed

Section Il. SERVICE UPON RECEIPT

drive belt tension is released. The fuel tank and prime tank assembly are empty

2-4. SERVICE UPON RECEIPT OF MATERIEL.

and their interior surfaces are coated (refer to TM 38-230-1 and -2). The oil is

drained from the gasoline engine. All pipe openings are sealed with caps or

NOTE

pressure-sensitive adhesive tape. The gages on the control panels are taped.

If the decontaminating apparatus is packed in wooden crates,

The interior surfaces of the pump, tanks, and all piping are coated with

notify intermediate direct support maintenance personnel.

a. General. A new decontaminating apparatus is received on three skids

b. Unloading. Avoid damaging the equipment. Lift the three skids from

in a dry and unserviced condition. The battery is not filled with electrolyte. The

the carrier or tow the skids to the receiving dock.