 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 3-1040-279-12&P
O
Repairable item. When uneco-
(b) The maintenance code entered
in the fourth position tells you whether or not
nomically repairable, condemn
the item is to be repaired and identifies the lowest
and dispose of the item at
organizational or aviation unit
maintenance level with the capability to do com-
plete repair (i.e., perform all authorized repair
level.
functions). (NOTE: Some limited repair may be
F
done on the item at a lower level of maintenance,
Repairable item. When uneco-
if authorized by the Maintenance Allocation
nomically repairable, condemn
Chart (MAC) and SMR codes.) This position will
and dispose of the item at the
contain one of the following maintenance codes.
direct support or aviation inter-
mediate level.
Application/Explanation
Code
H
Repairable item. When uneco-
Organizational or aviation unit is the
O
nomically repairable, condemn
lowest level that can do complete re-
and dispose of the item at the
pair on the item.
general support level.
Direct support or aviation intermedi-
F
D
Repairable item. When beyond
ate is the lowest level that can do
lower level repair capability,
return to depot. Condemnation
complete repair of the item.
and disposal of item not author-
ized below depot level.
General support is the lowest level
H
that can do complete repair of the
L
Repairable item. Condemnation
item.
and disposal not authorized be-
Specialized repair activity is the low-
L
low specialized repair activity.
est level that can do complete repair
Item requires special handling
A
of the item.
or condemnation procedures
Depot is the lowest level that can do
because of specific reasons (i.e.,
D
precious metal content, high
complete repair of the item.
dollar value, critical material, or
hazardous material). Refer to
Z
Nonrepairable. No repair is author-
ized.
appropriate manuals/directives
for specific instructions.
No repair is authorized. (No parts or
B
c. FSCM (Column (3)). The Federal Supply
special tools are authorized for the
Code for Manufacturer (FSCM) is a 5-digit nu-
maintenance of a "B''-coded item.)
meric code which is used to identify the manu-
However, the item may be recondi-
facturer, distributor or Government agency, etc.,
tioned by adjusting, lubricating, etc.,
that supplies the item.
at the user level.
d. Part Number (Column (4)). Indicates the
primary number used by the manufacturer (indi-
(3) Recoverability Code. Recoverability
vidual, company, firm, corporation, or Govern-
codes are assigned to items to indicate the disposi-
ment activity) which controls the design and
tion action on unserviceable items. The recover-
characteristics of the item by means of its engi-
ability code is entered in the fifth position of the
neering drawings, specifications standards, and
SMR Code as follows:
inspection requirements to identify an item or
range of items.
Recoverability
Definition
Codes
NOTE
Nonrepairable item. When un-
Z
When you use an NSN to requisi-
serviceable, condemn and dis-
tion an item, the item you receive
pose of the item at the level of
may have a different part number
maintenance shown in the 3rd
from the part ordered.
position of SMR Code.
F-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals