|
|
TM 3-1040-220-34&P
Figure 2-5. M9 showing components.
b. Maintenance.
(b) Remove two screws from cover plate and
(1) Removal. To remove the trigger, proceed as
remove the cover plate.
follows:
(a) Remove the rubber tube from the gun as
WARNING
indicated below:
The trigger is under tension. Be very
1. Remove collar located at the end of the barrel
careful when removing the spring. It
and withdraw sleeve from end of rubber tube.
may fly out of the valve body, causing
2. Hold the gun in a vertical position with the
injury to personnel.
nozzle pointing down.
Depress trigger safety and
squeeze trigger. Withdraw the rubber
(c) Remove trigger spring from valve body.
tube.
2-13
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |