How to Locate Repair Parts - TM-11-6740-282-24P0005

TM 11-6740-282-24P

and ES-38C and their components:

TM 11-5410215-14P, Shelter, Electronic Equipment

in the fifth position of the Uniform SMR Code format as

follows:

S280A/G

TM 11-6740-278-12, Processing Machine, Photographic

Recoverability

Film and Paper EH-29 B and EH-29B 1

codes

Definition

TM 11-6740-278-24P, Processing Machine, Photo-

Z --Nonreparable item.

When unserviceable,

grapic Film and Paper EH-29B and EH-29B1

condemn and dispose at the level indicated in

TM 11-6740-278-35, Processing Machine, Photographic

position 3.

Film and Paper EH-29Band EH-29B1

F --Reparable item. When uneconomically reparable,

TM 11-6740-279-12, Printer, Contact, Photographic

condemn' and dispose at the direct support level.

Continuous EN-6C and EN-6C1

H --Reparable item. When uneconomically reparable,

TM 11-6740-279-24, Printer, Contact, Photographic

condemn and dispose at the general support

Continuous EN-6C and EN-6C1

level.

TM 11-674-279-35, Printer, Contact, Photographic

D --Reparable item. When beyond lower level repair-

Continuous EN-6C and EN-6C1

capability return to depot. Condemnation and

TM 11-674-280-12, Photographic Printer EN-36B and

disposal not authorized below level.

EN-36B1

L --Reparable item. Repair, condemnation, and dis-

TM 11-6740-280-24P, Photographic Printer EN-36B and

posal not authorized below depot/specialized

EN-36B1

repair activity, level.

TM 11-6740-280-35, Photographic Printer EN-36B and

c. National Stock Number. Indicates the National

EN-36B1

stock number assigned the item and will be used for

TM 114740-281-12, Photographic Contact Printer

requisitioning purposes.

EN-100A and EN-100-A1

d Part Number. Indicates the primary number

TM 11-6740-281-24P, Photographic Contact Printer

used bythe manufacturer (individual, company, firm,

EN-100-A and EN-100-A1

corporation , or Government activity),which controls

TM 11-6740-281-35, Photographic Contact Printer

the design and characteristics of the item by means of

EN-100A and EN-100A1

its engineering, drawings, specifications, standards,

TM 11-6740-282-12, Photographic Darkroom Group

and inspection requirements to identify an item or

ES-38B

range of items.

TM11-6740-282-35, Photographic Darkroom Group

NOTE

ES-38B

When a stock numbered item is

5. How to Locate Repair Parts

requisitioned, the repair part received may have

a. When National stock number or part number is

a different part number than the part being

unknown.

replaced.

(1) First. Using the table of contents, determine

e. Federal Supply Code for Manufacturer (FSCM).

the functional group within which the item belongs. This is

The FSCM is a 5-digit numeric code listed m SB 708-

necessary since Illustrations are prepared for functional

42 which is used to identify the manufacturer,

groups and 'listings are divided into the same groups.

distributor, or Government agency, etc.

(2) Second. Find the illustration covering the

f. Description. Indicates the Federal item name

functional group to which the item belongs.

and, if required, a minimum description to identify the

(3) Third. Identify the item on the illustration and

item.

note the illustration figure and item number of the item.

g. Unit of measure (UIM). Indicates the standard

(4) Fourth. Using the Repair Parts Listing, find the

of the basic quality of the listed item as used in

figure and item number noted on the illustration.

performing the actual maintenance function. This

b. When National stock number or part number

measure is expressed by a two character alphabetical

known.

abbreviation, (e.g., ea, in, pr, etc). When the unit of

(1) First. Using the Index of National Stock

measure differs from the unit of issue, the lowest unit

Numbers and Part Numbers, find the pertinent National

of issue that will satisfy the required unit of measure

stock number or part number. This index is in sequence

will be requisitioned.

followed by a list of part numbers in alphameric sequence,

h. Quantity Incorporated in Unit. Indicates the

cross-referenced to the illustration figure number and

quantity of the item used in the breakout shown on the

number.

illustration figure, which is prepared functional group,

(2) Second. After finding the figure and item

subfunctional group, or an assembly.

number, locate figure and item number in the repair parts

4. Special Information

list.

a. Detail assembly instructions for items source

6. Abbreviations

coded to be assembled are found in TM 11-6740-282-

Not applicable.

Assembly components are listed immediately

35.

following the item to be assembled.

b .The following publication pertain to the ES-38B

(Next printed page is 4.1)