Maintenance code - TM-11-6625-396-24P0006

TM 11-6625-396-24P

Explanation

Items with these codes are not to be requested/requisitioned individually. They are

part of a kit which is authorized to the maintenance category indicated in the

third position of the SMR code. The complete kit must be requisitioned and ap-

MO--Made at

plied.

org/AVUM

category

MF--Made at

DS/AVUM

Explanation

category

Items with these codes are not to be requested/requisitioned individually. They

MH--Made at

must be made from bulk material which is identified by the part number in the

description and usable on code (UOC) column and listed in the Bulk Material

category

group-of the repair parts list, If the item is authorized to you by the third position

ML Made at

code of the SMR code, but the source code indicates it is made at a higher category,

Specialized

order the item from the higher category of maintenance.

Repair

Activity

(SRA)

MD--Made at

Depot

AO--Assembled by

org/AVUM

Explanation

category

AF--Assembled by

Items with these codes are not to be requested/requisitioned individually. The parts

DS/AVIM

that make up the assembled item must be requisitioned or fabricated and assem-

bled at the category of maintenance indicated by the source code. If the disposition

category

code of the SMR code authorizes you to replace the item, but the source code indi-

AH--Assembled by

GS category

cates the item is assembled at a higher category, order the item from the higher

category of maintenance.

AL--Assembled by

SRA

AD--Assembled by

Depot

Explanation

Code

XA--DO not requisition an "XA" coded item. Order its next higher assembly.

XB--If an "XB" item is not available from salvage order it using the FSCM and part number given.

XC--Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufactur-

ers part number.

XD--Item is not stocked. Order an `6XD" coded item through normal supply channels using the FSCM and part

number given, if no NSIN is available.

NOTE

Cannibalization or controlled exchange, when authorized, may be used as a

source of supply for items with the above source codes. except for those source

coded "XA" or those aircraft support items restricted by requirements of AR

750-1.

(2) Maintenance code. Maintenance codes tell you the category of maintenance authorized to USE and RE-

PAIR support items. The maintenance codes are entered in the third and fourth positions of the SMR code as

follows:

(a) The maintenance code entered in the third position tells you the lowest maintenance category autho-

rized to remove, replace, and use an item, The maintenance code entered in the third position will indicate

authorization to one of the following categories of maintenance.

C--Crew or operator maintenance' done within organizational or aviation maintenance.

O--Organizational or aviation unit category can remove. replace, and use the item.

F--Direct support or aviation intermediate category can remove, replace, and use the item.

H--General support category can remove, replace, and use the item.

L--Specialized repair activity can remove. replace, and use the item.