 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 11-6625-3050-24P
c. National Stock Number Indicates
maintenance codes are entered in the
theNational stock number assigned to
third and fourth positions of the Uni-
form SMR Code format as follows:
the item and will be used for requisi-
tioning purposes.
(a) The maintenance code enter-
d. Federal Supply Code for Manufac-
ed in the third position will indicate
the lowest maintenance level authorized
turer (FSCM). The FSCM is a 5-digit
numeric code listed in SB 708-41/42
to remove, replace, and use the support
item. The maintenance code entered in
which is used to identify the manufac-
the third position will indicate one of
turer, distributor, or Government
.
the following levels of maintenance:
agency, etc.
e. Part Number. Indicates the pri-
Application/Explanation
Code
mary number used by the manufacturer
O -- Support item is removed, replaced,
(individual , company, firm, corporation
used at the organizational level.
H -- Support item is removed, replaced,
or Government activity), which controls
the design and characteristics of the
used at the general support level.
item by means of its engineering draw-
ings, specifications, standards, and
(b) The maintenance code enter-
inspection requirements to identify an
ed in the fourth position indicates
item or range of items.
whether the item is to be repaired and
identifies the lowest maintenance level
NOTE
with the capability to perform complete
repair (i.e., all authorized mainte-
nance functions). This position will
When a stock numbered item
contain one of the following mainte-
is requisitioned, the repair
part received may have a dif-
nance codes:
ferent part number than the
Application/Explanation
part being replaced.
Code
H -- The lowest maintenance level capa-
f. Description. Indicates the Fed-
ble of complete repair of the
eral item name and, if required, a min-
support item is the general sup-
imum description to identify the item.
port level.
Z -- Nonreparable. No repair is author-
ized.
g. Unit of Measure (U/M). Indicates
the standard of the basic quantity of
the listed item as used in performing
(3) Recoverability code. Recover-
ability codes are assigned to support
the actual maintenance function. This
items to indicate the disposition action
measure is expressed by a two-character
-
on unserviceable items. The recover-
alphabetical abbreviation (e.g., ea, in,
ability code is entered in the fifth
pr, etc). When the unit of measure
differs from the unit of issue, the
position of the Uniform SMR Code as
lowest unit of issue that will satisfy
follows:
the required units of measure will be
requisitioned.
Recoverability
codes
Definition
Z -- Nonreparable item. When unservice-
h. Quantity Incorporated in Unit.
Indicates the quantity of the item use
able, condemn and dispose at the
level indicated in position 3.
in the breakout shown on the illustra-
H -- Reparable item. When uneconomic-
tion figure, which is prepared for a
functional group, subfunctional group,
ally reparable, condemn and dis-
pose at the general support level.
or an assembly.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals