CONNECTOR UG-1870A/U REPLACEMENT (CONT) - TM-11-5995-208-24-P-10055

TM 11-5995-208-24&P-1

CONNECTOR UG-1870A/U REPLACEMENT (CONT)

NOTE

Outer copperweld braid and cable fillers (5) should extend into middle body and over

split ferrule when installing braid retaining ferrule (4).

33. Push braid retaining ferrule (4) over copperweld braid and cable fillers (5), and

into middle body.

NOTE

Be careful not to crossthread back-end body (6) onto middle body (7) when installing.

34. Install back-end body (6) onto middle body (7).

NOTE

Back-end body must be within 3/16 of an inch of middle body's shoulder.

35. Using torque wrench, torque to 58-63 inch-pound on 1 1/8-inch flats.

3-29