CONNECTOR UG-1870A/U REPLACEMENT (CONT) - TM-11-5995-208-24-P-10032

TM 11-5995-208-24&P-1

CONNECTOR UG-1870A/U REPLACEMENT (CONT)

Round WD-37A/U cable has fillers. Oval WD-37/U cable has no fillers.

A binder/RFI shield consisting of polyester-aluminum laminate tape is under outer braid.

Trim this binder/RFI shield along with outer braid and fillers.

Binder/RFI shield and cable fillers should be trimmed flush with outer copperweld braid.

5. Trim outer copperweld braid (1) and cable fillers (2) to 3/4 1/32 of an inch from outer

jacket.

6. Wrap outer copperweld braid with masking tape.

CAUTION

Be careful not to nick or cut coaxial braid when trimming coaxial jacket (3).

7. Trim coaxial jacket (3) 3/4 1/32 of an inch from outer copperweld braid.

3-6