DIFFERENCES BETWEEN MODELS - TM-11-5995-208-100019

TM 11-5995-208-10

DIFFERENCES BETWEEN MODELS (CONT)

Cable Assembly, Special Purpose, Electrical CX-11230A/G also has two

conductors, each covered by a plastic insulation, separate shield, and a

plastic jacket. However, the conductors are twisted with plastic and paper

fillers, and secured with a thin, clear plastic. They are shielded again,

wrapped with a thin aluminum, and covered with an outer plastic jacket.

Cable is round in shape and connected at each end with Connector, Plug,

Electrical UG-1870A/U.

Cable Assembly, Special Purpose, Electrical CX-10734/G has two conductors,

each prepared in the same way as Cable Assembly CX-11230/G. Cable is oval in

shape and terminated at one end with Connector, Plug, Electrical UG-1870/U. The

other end is terminated on one conductor with Connector Assembly, Female UG-

1871 /U and on the other conductor with Connector Assembly, Male UG-1872/U.

NOTE

Cable Assembly, Special Purpose, Electrical CX-10734/G is

nonrepairable,

EQUIPMENT PERFORMANCE DATA

TWIN COAX CABLE ASSEMBLIES (CX-11230/G and CX-11230A/G)

Channel Capacity: 6, 12, 24, or 48 channels.

Insulation Quality (each coaxial cable): Can withstand up to 2500 vdc

between center conductor and shield.

Insulation Resistance (each coaxial cable): 50,000 megohms between

center conductor and shield.

Characteristic Impedance: CX-11230/G -- 55 to 65 ohms in frequency

range of 400 kHz to 1000 kHz; 55 to 60 ohms in frequency range of

1000 kHz to 3000 kHz; CX-11230A/G -- to 62 ohms in frequency

range of 500 kHz to 20 MHz.

DC Resistance of Center Conductor (each coaxial cable): 22 ohms for

each 1320 feet (1/4 mile) of cable when temperature is 68F;

2 ohms for every 100 feet of cable when temperature is 68F.

1-11