Section I. INTRODUCTION
d. Tools and Equipment. The numbers appear-
ing in this column refer to specific tools and
This appendix provides a summary of the main-
equipment which are identified by these num-
tenance operations covered in the equipment lit-
bers in Section III.
erature for Control Indicator C-8157/ARC and
e. Remarks. Self-Explanatory
Mounting MT-3802/ARC. It authorises catego-
ries of maintenance for specific maintenance
functions on repairable items and components
B-3. Explanation of Format for Tool and Test
and the tools and equipment required to perform
each function. This appendix may be used as an
The columns in the tool and equipment require-
aid in planning maintenance operations.
ments chart are as follows:
a. Tools and Equipment. The numbers in this
B-2. Explanation of Format for Maintenance
column coincide with the numbers used in the
tools and equipment column of the MAC. The
a. Group Number. Not used.
numbers indicate the applicable tool for the main-
b. Component Assembly Nomenclature. This
column lists the item names of component units,
assemblies, subassemblies, and modules on which
b. Maintenance Category. The codes in this
maintenance is authorised.
column indicate the maintenance category nor-
c. Maintenance Function. This column indi-
mally allocated to the facility.
cates the maintenance category at which per-
formance of the specific maintenance function
c. Nomenclature. This column lists tools, test,
at higher categories. The codes used represent
and maintenance equipment required to perform
the various maintenance categories as follows:
the maintenance function.
d. Federal Stock Number. The numbers in this
column are numbers assigned to the various tools
F -------Direct Support Maintenance
H-------General Support Maintenance
e. Tool Number. Not used.