Table 6-1. Organizational/Intermediate, Level Support Equipment (Cont) (Equivalent equipment is authorized.)

T.O. 31W2-2GSC24-2

TM 11-5805-688-14-1

NAVELEX 0967-LP-545-3010

National Stock No./

Item

Part No.

Pertinent Characteristics

Portable test set:

6625-00-244-3032

Generates audio frequency of 1 kHz +5% at -16

+0.1 dBm.

Hewlett-Packard

Model 3550B

Measures audio voltage of +7 dBm at 1 kHz +5% to

accuracy of +0.1 dBm.

Input/output impedance of 600 ohms (balanced).

Wire-wrap repair

Martin Marietta P/N

kit, consisting of:

SK62759367

Cut/strip

Gardner-Denver P/N

Accepts 28 AWG solid insulated

accessory

515654

wire.

Unwrapping tool

Gardner-Denver P/N

Unwraps left-hand or right-hand

511203

wrapped connections of 28 AWG solid wire.

Wire wrapping

Gardner-Denver P/N

Accepts 28 AWG wrapping bits and

tool

14XA2-B3C-(28)

sleeves.

Wrapping bit

Gardner-Denver P/N 508748

Accepts 28 AWG solid wire.

Wrapping sleeve

Gardner-Denver P/N 507100

Accepts 28 AWG solid wire.

1. Observe which display is lighted. If a card error

display indicates that the detected

is displayed, also observe the card number

error is not transitory in nature and

appearing in the FAULT LOCATION display.

must therefore be corrected.

2. Momentarily press front panel DISPLAY RESET

3. Upon release of DISPLAY RESET switch,

switch.

observe that the initially displayed error

reappears. If a power supply error is displayed,

NOTE

proceed to step

Reappearance of the initial error

4. If a card error is displayed, proceed to step 11.

6-3