REMOVAL AND REPLACEMENT OF ENGINE

TM 11-3895-209-14

5-13. REMOVAL AND REPLACEMENT OF ENGINE

REMOVAL

A Remove the timing belt; turn off the fuel valve, disconnect the fuel line, and remove the nipple

from the fuel pump. Disconnect the choke control, the throttle control, and the ignition wiring

from the engine.

B Drain the engine crankcase.

C Remove the four bolts (1), nuts (2), lock washers (3), and then remove the engine guard (4).

D Disconnect the exhaust pipe from the engine.

E Lift the rear edge of the frame clear of the floor, and place it on blocks.

F Remove the four nuts (5) and lock washers (6) that attach the engine support to the frame.

G Lift the engine and its attached support and oil drain lines clear of the frame, and place it on the

floor.

5-27