5-12. DISASSEMBLY AND REASSEMBLY OF JACKSHAFT ASSEMBLY - Continued
E Remove the four bolts (1), nuts (2), lock washers
(3), and then remove the jackshaft assembly
from the frame.
F Loosen the three socket-head clamp screws in
the flange of the timing pulley (17), and pull the
timing pulley off the shaft.
G Remove the key (16) from the shaft.
H Loosen the two socket-head setscrews (8) in the jack-
shaft pulley (10), and remove the pulley from the
I Remove the key (9) from the shaft.
J Loosen the socket-head setscrew (11) and pull the
collar (12) off the shaft.
K Loosen the socket-head setscrew (18) and pull the collar (19) off the shaft.
L Pull the shaft (22) out of the housing.
M Remove the two pipe plugs (15) from the
jackshaft bearing housing (23).
N Remove the retaining rings (13) and (20),
and pull the ball bearings (14) and (21)
out of the jackshaft bearing housing (23).