DISASSEMBLY AND REASSEMBLY OF CLUTCH AND BRAKE ASSEMBLY - Continued

TM 11-3895-209-14

5-11. DISASSEMBLY AND REASSEMBLY OF CLUTCH AND BRAKE ASSEMBLY - Continued

X Install the idler arm ball bearing (28) and the retaining

ring (7) on the shaft.

Y Install the idler arm ball bearing (6) and retaining ring (4)

in the outer side of the idler arm (27).

Z Slide the assembled idler arm over the shaft and onto

the idler arm ball bearing (28), and install the retaining

ring (5).

AA Screw the nut (21) onto the operating rod (22).

AB Insert the operating rod (22) into the brake cam eye (39),

a n d install the nut (20).

AC Attach the operating rod (22) to the idler arm (27) with

the clevis pin (19) and cotter pin (18).

AD Insert the cotter pin (16) into the hole in the operating

rod (22), so that the eye of the cotter pin is inward.

AE Connect the control arm return spring (17) between the

cotter pin (16) and the hole in the brake band.

5-19