5-11. DISASSEMBLY AND REASSEMBLY OF CLUTCH AND BRAKE ASSEMBLY - Continued
K Install the two brakedrum keys (30) in the slots in the
reel drive shaft (76).
L Install the brakedrum (31) on the reel drive shaft;
align the grooves in the drum with the keys in the
shaft, and install the retaining ring (29).
M Attach the two brake brackets (56) to the housing with the four bolts (54) and lock washers (55).
N Position the brake band (53) over the brakedrum and brake brackets so that the V-shaped lug
for the adjusting nut is on the side opposite the lever arm.
O Insert the two brake adjusting springs (48) between the outer side of the brackets and the brake
band, and install the two key washers (47) and bolts (46). Do not tighten the bolts.