4-11. REMOVAL AND REPLACEMENT OF FUEL FILTER AND FUEL LINE- Continued
A Screw the elbow (5) into the fuel tank.
B Screw the fuel valve (4) into the elbow (5).
c Screw the fuel filter body onto the fuel valve (4).
D Screw the fuel filter element (9) into the fuel filter body.
E Replace fuel sediment bowl (7), fuel filter gasket (8), baiI (6), and fuel filter body (10).
F Screw nipple (3) into fuel filter body (10) and screw fuel line (1) onto nipple.
G Screw nipple (2) into fuel pump. Screw fuel line (1) onto nipple.
H Turn the fuel valve fully counterclockwise (on).
4-12. REMOVAL AND REPLACEMENT OF CHOKE CONTROL
A Remove screw (1), nut (2), lock washer (3), and
control cable clamp (4).
B Remove screw (7), nut (8), lock washer (9), and
choke and throttle clamp (10).
C Remove nut (1 5), lock washer (1 6), screw (1 4), and
choke cable clamp (7).
Unhook CHOKE control rod (23) wire from the
choke lever on carburetor.
E Remove nut (21) and lock washer (22)
from shaft of the CHOKE control rod (23).
F Pull CHOKE control rod (23) out
through the hole in control panel.
Remove the three brackets
(6), (1 3), and (20) only, if the
engine is to be removed.