Section Il. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

TM 11-3895-209-14

2-3. REEL AXLE CONTROLS- Continued

CAUTION

Do not apply power to the reel axles when the hub locks are engaged. Damage to the hub

locks will result.

HUB LOCK LEVER- Vertical position: locks the axle to prevent

rotation.

Horizontal position: allows the axle to turn

freely.

Section Il. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

2-4. GENERAL

Scheduled PMCS are things that you must do at specified times to make sure that your equipment is

operationally ready. As scheduled PMCS is done, associated routine PMCS should also be done,

Scheduled PMCS, and when to do them, are listed in table 2-1.

Before you operate, always keep in mind and observe the WARNINGS and CAUTIONS contained in this

technical manual and plates installed on the equipment that are associated with the functions you

are about to perform. Perform your before (B) PMCS from table 2-1.

While you operate, always keep in mind and observe the WARNINGS and CAUTIONS contained in this

technical manual and plates installed on the equipment that are associated with operation

functions. Perform your during (D) PMCS from table 2-1.

After you operate, be sure to perform your after (A) PMCS from table 2-1.

2-3