PRE-SHOP INSPECTION. - TB-9-2890010

TB 9-289

(7) Inspect skids while on container for weakness and wear by noting the following defects. (See paragraph 5j)

(a) Cracks and splits wider than 1/8 inch, longer than 1/2 the length and exceeding 1/2 the width and

thickness.

(b) Broken offends and split or chipped off areas longer than 1/3 the length and exceeding 1/2 the width

or thickness, extending into bolt holes and stacking notches, or eliminating more than 1/3 the load bearing

surface.

(d) Space wider than 1/2 inch between side of skid and skid mounting bracket due to narrow skid width.

(e) Any evidence of decay except in knots.

(f) Any evidence of insect infestation.

(8) Inspect covers and r cessed receptacles, including plastic windows, from upper half of container for

reusability. (See paragraph 5k)

d. Inspect installation decal for cracks, tears, illegibility and failure of adhesion. Decals with these characteristics are

unserviceable. (See paragraph 8d)

e. Route all containers with defects to repair shop. If reconditioning costs will exceed 60% of the new container

costs shown in the AMDF, authorization of disposal or repair of container must be obtained from:

Commander

U.S. Army Tank-automotive & Armaments Command

ATTN: AMSTA-IM-A

Warren, MI 48397-5000

f. After reconditioning, route all containers to leak testing(see paragraph 6).

g. After all reconditioning and leak testing has been completed, route all containers to the paint shop.

(See