BATTERY-GENERATOR INDICATOR INDICATES GENERATOR IS OVERCHARGING WITH POINTER IN RIGHT RED

TB 9-2350-257-20-1

3 BATTERY-GENERATOR

INDICATOR INDICATES GENERATOR IS OVERCHARGING WITH

POINTER IN RIGHT RED

If 25 to 30 VDC exists, refer to TM 9-2350-257-

With engine running, check for 25 to 30 VDC at slave

20-1 troubleshooting procedures for the battery-

receptacle.

generator Indicator.

NOTE

If more than 30 VDC exists, proceed to

The center connection of the slave

TROUBLESHOOTING PROCEDURE, step 1.

receptacle is positive (+) when

measured to vehicle chassis (GROUND)

NOTE

Both the RISE and RISE passive

harness number is shown in the

NOTE

troubleshooting procedures which follow

When removing or replacing connectors,

The RISE passive harness number is

a spanner wrench must be used to avoid

in parenthesis adjacent to the RISE

damaging connector shells.

harness number.

For ex- ample

harness 11673839 (11655747)

At the completion of the following

battery-generator-regulator

troubleshooting

malfunctions

procedures, ensure that all wiring

harnesses,

cables,

and

other

components have been reconnected

and secured