Click here to make tpub.com your Home Page

Page Title: Air Intake Hose Assembly Replacement
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TB 9-2300-378-14
6-9. Air Intake Hose Assembly Replacement (Fig. 6-7).
NOTE
Replacement of left and right air cleaner intake hoses is the
same. Left side of vehicle shown.
Removal.
a.
(1) Open top deck grille doors.
(2) Remove clamp securing air intake hose to air intake elbow (view A). Remove
hose from elbow.
(3) Inside crew compartment (view B), remove eight nuts and lockwashers securing air
intake to bulkhead.
(4) Pull air intake, with air intake hose attached, into crew compartment.
(5) Loosen clamp securing hose to air intake flange. Remove hose from flange.
Secure hose to flange with clamp.
NOTE
If clamp and/or clamp screw is damaged, replace entire
clamp assembly. If hose is damaged, replace hose.
Installation.
b.
(1) Inside crew compartment, put small amount of silicone compound (item 5,
appendix C) inside air intake hose opening (view B). Put air intake hose on air
intake flange. Secure hose to flange with clamp.
(2) Push hose through bulkhead opening and secure air intake to bulkhead with eight
nuts and new lockwashers.
(3) Put air intake hose on air intake hose elbow (view A). Secure hose to elbow with
clamp.
(4) Close top deck grille doors.
6-10. Air Intake Replacement (Fig. 6-7).
NOTE
Replacement of left and right air intakes is the same. Left
side shown.
Removal.
a.
(1) Open top deck grille doors.
(2) Remove clamp securing air intake hose to hose elbow (view A). Remove hose
from elbow.
(3) Inside crew compartment (view B), remove eight nuts and lockwashers securing air
intake to bulkhead. Discard lockwashers.
(4) Pull air intake, with air in-take hose attached, into crew compartment.
(5) Loosen clamp securing hose to air intake flange. Remove hose from flange.
(6) Remove gasket (view C) between air intake and bulkhead. Discard gasket. Clean
off old adhesive and gasket material.
6-27

Privacy Statement - Press Release - Copyright Information. - Contact Us