Section IV. Maintenance Procedures
T h i s section provides additional maintenance procedures required to support vehicles
equipped with the improved clean air induction systems. The procedures are to be used in
conjunction with the vehicle organizational maintenance manuals (TM 20-1).
6-8. Powerplant Replacement
During powerplant replacement, the following steps must be performed in addition to the
procedures described in the TM-20-1.
Removal. After disconnecting the air cleaner outlet hose:
(1) Loosen two hose clamps (fig. 6-6) securing hose between air cleaner exhaust
manifold tube and VEDES intake tube.
(2) Slide hose back off air cleaner exhaust manifold tube.
Installation. After installing the air cleaner outlet hose and clamps:
(1) Install hose between air cleaner exhaust manifold tube and VEDES intake tube
(2) Secure hose with two hose clamps.
Figure 6-6. VEDES intake tube hose removal/installation (powerplant replacement).