Click here to make tpub.com your Home Page

Page Title: Perform steps (a) thru (f) to both left and right sides of tank.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TB 9-2300-378-14
(2) Remove No. 3 and No. 4 outriggers as follows:
NOTE
Perform steps (a) thru (f) to both left and right sides of
tank.
(a) Remove two bolts MS35673-838 or MS35764-838 or MS35763-31, bolt
M S 3 5 7 6 3 - 3 2 and flat washer MS27183-17 securing outer support bracket
1 1 6 5 5 1 1 3 - 1 (Lt) or 8762504 (Lt) or 11655113-2 (Rt) or 8762503 (Rt) to
outrigger number 3 (fig. 4-16, View A).  R e m o v e and retain outer support
bracket.
NOTE
Some outer support brackets 8762504 (Lt) and 8762503 (Rt)
removed from left and right outrigger number 3 may need to
be reworked to fit the new outrigger supplied in kit. If the
outer support brackets removed in step (a) above measured
5-1/2 inches high as shown in figure 4-17 and the distance
between the centers of the two 3/8 inch tapped holes in 3
i n c h e s as shown in figure 4-17 then these outer support
b r a c k e t s must be reworked according to figure 4-18. The
r e w o r k will require trimming 1 inch off the top of the
b r a c k e t and drilling and tapping one new 3/8-16 UNC-2B
hole as shown in figure 4-18.
(b) Remove screw MS90725-112 and nut MS51922-33 securing outrigger number 3
to inner support bracket (fig. 4-16, view A).
(c) Remove four screws MS90725-183 and lockwashers MS35338-51 securing
outrigger number 3 to inner support bracket and remove and discard outrigger
11655110-1 (lt) or 8762417 (lt) or 11655110-2 (rt) (fg. 4-16, view A).
(d) Remove two bolts MS35763-838 or MS35764-838 or MS35763-31, bolt
M S 3 5 7 6 3 - 3 2 and flat washer MS27183-17 securing outer support bracket
8762503 (lt) or 8762504 (rt) to outrigger number 4. Remove and retain outer
support bracket (fig. 4-16, view B).
NOTE
Do not rework outer support brackets removed from left and
right outrigger number 4.
(e) Remove two screws MS90725-112 and nuts MS51922-33, securing outrigger
number 4 to inner support bracket (Fig. 4-16, View B).
(f) Remove four screws MS90725-183 and lockwashers MS35338-51, securing
outrigger number 4 to inner support bracket and remove and discard outrigger
8762387 (Lt) or 8762388 (Rt) (Fig. 4-16, View B).
4-27

Privacy Statement - Press Release - Copyright Information. - Contact Us