 |
|||
|
|
|||
|
Page Title:
HYDRAULIC, FLUID, AIR AND VACUUM SYSTEM |
|
||
| ||||||||||
|
|
 4316
Assembled Hose, Fitting, Lines, Breathers,
4213
Non Rotating Rectifiers, Converters, Inverters:
Filters and Traps: (For accessory hose, see
Include transformers, filter chokes, coils and
condensers, frequency changers, dry and wet
4317
Manifold and/or Control Valves: Include relief
type rectifiers, inverters, converters, etc. (Do
valves, relay valves, check valves, mounting
not include transformers covered in 4201).
parts, etc.
4214
Radio Interference Suppression:
4318
Air or Vacuum Cylinder Assemblies: Include
Include all capacitors, resistors, choke coils,
diaphragms, chambers, cylinders, etc.
filters, etc. (Those items used primarily for
4319
Pumps and Pump Drives: (Air or vacuum) (For
radio interference suppression) Exclude
compressor units, see group 50).
similar items used on ignition systems and
4320
Air, Vacuum and/or Manual Controls: Include
rotating electrical equipment, etc., coverable
linkage.
in groups 06, 40, and 44. All other radio
4321
Tanks or Reservoirs
interference suppression circuits will be
4322
Air Floatation System: For floatable vehicles
covered here.
4323
Air Pressurization System: For vehicles
4215
Electrical Test Equipment: (Portable or
equipped with front axle steering knuckle boot
Mounted) (If electronic type see group 67).
4216
Miscellaneous Wiring and Fittings 4217 Magnet
44
WELDING, METALIZING. METAL HE AT ING,
(Crane, Sweeper, etc.): Include controller,
AND PLATING EQUIPMENT
4400
Major Assemblage: Arc Welders, Electro
resistor, etc.
Plating, Flame Cutting, or Gas Welding Units,
etc. (Insert applicable nomenclature and use
43
HYDRAULIC, FLUID, AIR AND VACUUM
groups
following
for
sub-assembly
SYSTEM: (Exclude brake system)
breakdown).
Note. For hydraulic steering system
4401
Rotor Assembly: Include motor, generator,
refer to group 14.
exciter, etc.
4300
Hydraulic System: (Complete assembly)
4402
Stator Assembly: Include motor, generator,
4301
Strainers, Filters, Hose, Pipe Fittings, Tubing,
exciter, etc.
etc.
4403
Brush Holder Assembly: Include motor,
4302
Pump and Pump Drives: Include mounting
generator, exciter, etc.
parts, etc.
4404
Drive Components: Include belts, pulleys,
4305
Manifold and/or Control Valves: Include relief
couplings, etc.
valves, check valves, regulating feed valves,
4405
Frame Support, Housing, Carrier, etc.
and mounting parts, etc.
Include all mounting parts and lifting eyes,
4306
Hydraulic, Vacuum, or Fluid, Motor
etc.
4307
Hydraulic Cylinders
4406
Ventilating, Cooling System
4308
Liquid Tank or Reservoirs
4407
Control Panels, Housing, Cubicles: Include
4309
Hydraulic Controls and/or Manual Controls:
indicators, instruments, wiring assemblies,
Include linkage, hydraulic clutch controls,
etc.
accumulators, etc.
4408
Connecting Devices: Include terminal blocks,
4315
Gas, Air or Vacuum System: Include tent,
junction boxes, connectors, hoses, wiring
shelter or balloon inflators, etc. Use indexes
following, as applicable, for breakdown.
AGO 9883A
16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals